Helite Replacement Lanyard

Helite Replacement Lanyard

Helite CO2 Canister 60cc

Helite CO2 Canister 60cc

Helite CO2 E-Canister 100cc

€69.95
Helite CO2 E-Canister 100cc
Availability: In stock
Part Number
HELITE-E-CO2-100CC

Helite CO2 e-canister – a screw in device used for any electronically fired Helite airvests only.

Helite CO2 e-canister – a screw in device used for any electronically fired Helite Airvest.
Available in various sizes – 60cc and 100cc.
  • When selecting your electronically fired CO2 e-canister please make sure you have the correct size in order for it to be compatible with your  airvest.
  • Please see the instruction manual supplied with the jacket or our 
    instructional video for help in changing canisters


Important Information:
  • The  canister must be screwed in tightly; under no circumstances should the screw  thread be visible.
  • The canister should be stored and used in temperatures below  45ºC. Do not leave full canisters in the car in high temperatures. The canister  must be used at a temperature over 0ºC. If stored under 0ºC, warm up before use  or replace with a warmer cartridge.
  • The CO2 canisters have a long life span but  we do recommend a yearly check. The check consists of weighing your canister and  making sure it is approximately (+/-3g) equivalent to the weight written on your  canister.
  • If rust or other corrosive marks appear in the outer surface of the canisters change them immediately and discard. The e-canisters work with e-GP  Air, e-Turtle-2 and the B’Safe Cycle Airvests


    Product NameVest/Jacket Sizee-Canister
    e-Turtle
    S-XL
    e 60cc
    LL-XLL
    e 100cc
    e-GP Air
    S-XLL
    e 60cc
More Information
Brand Helite Air Vest