We use cookies to make your experience better.
To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.
Kriega Haul Loop - Front
€29.00
Kriega Haul Loop - Front
Availability: In stock
Part Number
KWEHL
HAUL LOOP - FRONT
Front fender straps are essential equipment for extreme enduro events. Kriegas unique design is a self supporting/semi-rigid solution, which is always easy to find and use.
FEATURES
There are 2 methods of fitting the front Haul Loop. Both use 2 x H-Duty cable ties: Undo web on the stainless buckles. Wrap the web around the fork leg, directly under the lower triple-clamp. Re-thread the stainless buckles(making sure to feed the web back through the buckle to lock it off). The loose end can be placed under the elastic-loop provided. To prevent the Haul Loop moving down the fork leg/s you need to use a cable tie in either 2 ways. The first method is to feed the cable tie through the small web-loop next to the stainless buckle. Connect the cable tie and tighten around the fork leg directly above the lower triple-clamp (this method is illustrated on the Haul Loop page) Another method is to use 2 x cable ties linked together in a figure of eight behind the front light/number plastic (this method is shown on this page). The figure of eight method is a superior one, as you can fine tune the angle of the Haul Loop by decreasing the length/s of the cable ties. The shorter the tie the more elevated the Haul Loop will sit.
TECH-SPECS
Semi-rigid design Universal fit (front only)
Ultra-tough construction
HYPALON: abrasion resistant re-enforcement
TOUGHTEK - grips wet or dry
Stainless steel buckles
WEIGHT
150.00 Grams
Front fender straps are essential equipment for extreme enduro events. Kriegas unique design is a self supporting/semi-rigid solution, which is always easy to find and use.
FEATURES
There are 2 methods of fitting the front Haul Loop. Both use 2 x H-Duty cable ties: Undo web on the stainless buckles. Wrap the web around the fork leg, directly under the lower triple-clamp. Re-thread the stainless buckles(making sure to feed the web back through the buckle to lock it off). The loose end can be placed under the elastic-loop provided. To prevent the Haul Loop moving down the fork leg/s you need to use a cable tie in either 2 ways. The first method is to feed the cable tie through the small web-loop next to the stainless buckle. Connect the cable tie and tighten around the fork leg directly above the lower triple-clamp (this method is illustrated on the Haul Loop page) Another method is to use 2 x cable ties linked together in a figure of eight behind the front light/number plastic (this method is shown on this page). The figure of eight method is a superior one, as you can fine tune the angle of the Haul Loop by decreasing the length/s of the cable ties. The shorter the tie the more elevated the Haul Loop will sit.
TECH-SPECS
Semi-rigid design Universal fit (front only)
Ultra-tough construction
HYPALON: abrasion resistant re-enforcement
TOUGHTEK - grips wet or dry
Stainless steel buckles
WEIGHT
150.00 Grams
| Brand | Kriega |
|---|